cass
Product Lines
Adtech Plastic Systems

Adtech Polyester Systems

  • Room and High Temperature Fillers
  • Carvable Fillers
  • Flame Retardant Fillers
  • Casting Resins
  • Sandable Fillers
  • Sprayable Fillers
  • Metal Fillers
  • Semi-Rigid Fillers

Adtech Epoxy Resin Systems

  • Room and High Temperature
  • Surface Coat Systems
  • Laminating Resin Systems
  • Mass Casting Resin Systems
  • Adhesive Systems
  • Tooling Compounds
  • Flame Retardant Systems
  • Edge Fill Adhesive Systems
  • Vacuum Infusion Resin Systems
  • UV Resistant Resin Systems
  • Toughened Epoxy Systems

Ad Tech Lowex Fast-Set Urethanes

  • Semi-Rigid, 5 Minute Casting Urethane
  • Rigid, 5 Minute Casting Urethane
  • Rigid, 15 Minute Casting Urethane
     

 

Adtech Polyester System

 

EP-300 Epoxy Plank is a light blue high temperature epoxy tooling plank designed for building aerospace master models, lay-up tools for medium and high temperature prepregs, vacuum-form tooling and other high temperature tooling. This high temperature tooling plank has an excellent surface finish, good edge definition, and is easy to CNC machine. EP-300 Epoxy Plank is recommended for tooling up to 300°F.

Tool Chemical Composites
 

TCC Tooling Planks

  • DP-L 051 Die Plank®
  • PP-I052 Pattern Plank® The "Red Stuff'®
  • MP-1055 Model Plank®
  • MP-I065 Salmon Model Plank®
  • MP-I075 Mid-Temp Model Plank®
  • EP-300 High Temp Epoxy Model Plank®
  • Polyurethane Foam Boards (12, 15, 20 And 30 Lb)

TCC Urethane Resin Systems

  • 50 - 95 Shore A Urethane Tooling Systems
  • 60 - 80 Shore D Urethane Tooling Systems
  • Water Clear Urethane Casting System

TCC Reinforcement Structures
    Fiberglass Room and High Temperature

  • Aluminum Core Honeycomb Panels
  • Flat Stock LaminatesTubing

TCC Epoxy Resin Systems
    Room and High Temperature

  • Surface Coat Systems
  • Laminating Resin Systems
  • Mass Casting Resin Systems
  • Adhesives and Patch Pastes

Red Stuff

Model Plank® MP-1075 is a higher temperature urethane tooling and model plank designed to be heat resistant up to 225°F (107°C). Its excellent tensile and compressive strength combined with its high temperature characteristics make the MP-1075 excellent for aerospace masters and lay-up tools, prototype foundry patterns and prototype vacuum-forming molds.

Foam Board

Casting Urethanes
Adtech Marine Systems
 
  • Marine Laminating System
  • Marine Polyester Repair Systems
  • Marine Bonding Systems
  • Marine Epoxy Coating Systems
  • Marine Fairing Compounds
  • Marine Adhesives
  • Marine Sprayable Fairing Compounds
  • Marine Pumps for Dispensing
     
Accessory Items
 

Tooling Fabrics

  • Fiberglass Tooling Fabrics
  • Fiberglass Tape

Fillers

  • Ceramic Fillers
  • Aluminum Grain
  • Aluminum Cut Wire
  • Steelettes
  • Cabosil
  • Cotton Flock
  • Snow Flake
  • 1/32" Milled Fibers

Accessory Items

  • Color Concentrates
  • Release Agents
  • Lacquer Sanding Sealer
  • Dri-Purge
  • Dispensing Guns/Mixing Nozzles
  • Mixing Cups and Tubs
  • Stirring Sticks and Gloves
  • Laminating Brushes
 
 
 

PRODUCTS | TECHNICAL HELP | NEWS | HOME

info@polymertooling.com
Let us know if you want to be on our
e-mail distribution list.
610-363-5440 • 800-327-8787
fax: 610-524-1004
303 Commerce Drive, Exton, PA 19341
© 2003-2008 Polymer Tooling Systems, Inc.
Site developed and maintained by GK Productions, Inc.
Call for pricing and our customer service representative will help you make the proper selection of product.
We will ship to your partners and affiliates
— worldwide!