| |
PTS announces the VS 2000 Vacuum Degassing System
for silicones and other resins. |
VS 2000-A Vacuum Chamber
- 15" inside diameter
- 18" deep
- Includes clear acrylic top
- Vacuum gauge
- All brass connector fittings
- Ball-valve shut off
- 5' hose with quick-release fitting
- Approximate shipping weight 50 pounds
VS 2000-B Fast-Vac® DV-200N
Deep Vacuum Pump
- 7 CFM
- Direct drive
- 2-stage vane pump
- 1/2 horsepower, 115V, 60 CYC
- 29" HgMercury vacuum
- Approximate shipping weight 30 pounds
Chamber with Pump |
|
|
| |
| Polymeric Systems, Inc. Product Announcements |
PSI Epoxy Putty Sticks |
A family of 8 different products, each designed for a specific type of application. The ultimate for small or emergency repairs. Fast and easy to use. Pull off a portion; mix and apply. Bonds instantly with superior strength. Sculpt it for fine detail. Hardens in minutes. Drill it. Tap, file, machine, saw, sand or paint it. Thousands of uses - limited only by your imagination!
Click here for Overview PDF.
| QuikCopper® |
QuikWood® |
| Fast Steel® |
InstaCrete® |
| QuikPlastik® |
QuikAluminum® |
| AquaMend® |
RepairitQuik® |
|

Top of Page |
|
| |
| PTS and CASS Polymers, Inc. Connection |
| Polymer Tooling Systems, Inc. is now representing the CASS Polymers, Inc. high quality formulated polymers. The product line also encompasses ADTECH Plastic Systems and Tool Chemical Composites solutions (TCC). |



Top of Page |
|
| Smooth-On Product Announcements |
|
Equinox™ Series — Mix & Apply-By-Hand Platinum Mold Putty
Equinox Silicone Putty Products are new fast-set silicone compounds (platinum catalyst) that can be easily mixed and
applied by hand to a variety of surfaces.
Click here for Overview PDF. |
|
TASK™ 7 —
Moisture Resistant Rigid Urethane Casting
Formula TASK 7 is a rigid urethane casting resin that resists ambient moisture and minimizes bubbles in cured
castings (i.e. caused due to humidity in the air).
Click here for Overview PDF. |
TASK™ 8 —
Heat Resistant Polyurethane Resin
TASK 8 is a heat resistant polyurethane resin system made specifically for prototyping / casting applications that require
high thermal resistance (265°F / 130°C).
Click here for Overview PDF. |
EZ-Spray Jr.
EZ Spray Junior is a versatile, convenient and easy-to-use spray system
for spraying the following EZ-Spray materials:
- EZ-Spray 45 Urethane Rubber
- EZ-Spray Silicone Rubber
- EZ-Spray Urethane Plastic
- StyroCoat™ Styrofoam Coating
- EZ-Spray Rigid Foam
Convenient and easy to use — if you have a compressor, you can spray rubber, plastic or foam.
Time & Labor Savings - no cleaning & no maintenance.
Click here for Overview PDF. |
VytaFlex™ Series —
Liquid Urethane Rubbers
Using Smooth-On’s exclusive “V-Polymer” technology, VytaFlex urethane rubbers are “next generation”
products to our popular Reoflex Series and offer superior physical and performance properties.
Click here for Overview PDF. |
|
|
|
|